mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-90 cage code 06324 1.195 (30.4) .031 (.8) ty p. e typ. cable range ty p. style f strain relief 1.00 (25.4) max typ. rfi/emi gasket optional b c d a #4-40 unc (2 places) typ. g typ. connector retaining spring shell sizes 3, 4, & 5 = .300 (7.6) shell size 6 = .425 (10.8) .135 (3.4) max f style g gland nut shell sizes 3, 4, 5 & 6 shell sizes 1 & 2 1.00 (25.4) min. typ. 557-237 d-subminiature g-spring solid backshell 557 t 237 m 2 f0 b 1 f 02- 04 inner support ring dash no. (table iv), n = no support ring cable entry dash no. (table ii) f = strain relief g = gland nut 0 = without emi gasket, 1 = with emi gasket jackscrew type (page a-4) basic part no. cable entry style t = top basic part number finish symbol (page 3) shell size (table i) receptacle mounting (table iii) f0 = front mounting r1-r9 = rear mounting
mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-91 cage code 06324 557-237 d-subminiature g-spring solid backshell 1. metric dimensions (mm) are indicated in parentheses. 2. do not use connectors with float mountings. 3. for front mount, mating connector must be mounted to panel using m24308/26 female screwlocks. for rear mount, use glenair gk134. 4. for proper termination it is recommended that glenair 469-001 shield support ring be used on all assemblies. place ring over wire bundle and under shield, position under g-spring. min .125 (3.2) .156 (4.0) .250 (6.4) .280 (7.1) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) cable range max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) dash no. 01 02 03 04 05 06 07 08 09 10 table ii: cable entry e max .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) f max .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) dash no. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 table iv: support ring i.d. .187 (4.7) .218 (5.5) .250 (6.4) .281 (7.1) .312 (7.9) .343 (8.7) .375 (9.5) .406 (10.3) .438 (11.1) .468 (11.9) .500 (12.7) .531 (13.5) .562 (14.3) .594 (15.1) .625 (15.9) .656 (16.7) .687 (17.4) .719 (18.3) .750 (19.1) .781 (19.8) .812 (20.6) o.d. .227 (5.8) .258 (6.6) .290 (7.4) .321 (8.2) .352 (8.9) .383 (9.7) .415 (10.5) .446 (11.3) .478 (12.1) .508 (12.9) .540 (13.7) .571 (14.5) .602 (15.3) .633 (16.1) .665 (16.9) .696 (17.7) .727 (18.5) .758 (19.3) .790 (20.1) .821 (20.9) .852 (21.6) support ring dash no. r1 r2 r3 r4 r5 r6 r7 r8 f0 table iii: receptacle mounting panel thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) n/a g .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .305 (7.7) shell size 1 2 3 4 5 6 table i: shell size & conector interface dimensions com?l shell size ref e/09 a/15 b/25 c/37 d/50 f/104 a max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) b max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) c ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) d .005 (.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) 2.500 (63.5)
|
